SIGN A RAMA of the Triad
Take advantage of the night and advertise your business with illuminated channel letters.
Channel letters can be made in a number of different ways. They can be front lit, back lit or both. They can have colored faces or have clear faces so that the neon lines can be seen in the letter. Channel letters can be illuminated with either LED or neon. We have standardized on LED for energy efficiency and less expensive service costs, but we will make with neon at your request. Channel letters can also be individually mounted or can be mounted to what is called a racway. A raceway houses the power supplies and allows for less holes in the wall when mounting the letters. Please check with your landlord to see if they require raceway mounting.
Light up your business with an illuminated cabinet. Cabinets can come in many different varieties. We can custom manufacture them to any shape or size that you want. One important thing to consider in choosing a cabinet sign is what type of face you would like. (Please visit our face terminology page for more info). Cabinets are generally illuminated with High Output daylight fluorescent lamps so that they light up as bright as possible at night.
Banners can be made from several different materials. Vinyl banners are standard for most applications and can either have lettering applied or can be digitally printed. Fabric banners are also commonly used in interior applications and are often used for tradeshow displays. In some cases where the windload is severe or the banner can not fully block visibility mesh banners can also be used.
Please ask your salesperson which type of banner best fits your application.
Make wayfinding easy around your community or school with our directional signage. We design, fabricate and install any type of directional signage that you may need.
A-Frame stands can be made from several different materials. Steel and plastic frames are standards for Sign-A-Rama. Steel frames are a cheaper alternative to the plastic frames which are made to accept water or sand to weigh it down and prevent the wind from blowing it around. Either frame type can be set up to accept changeable panels so that they can be used over and over again.
Dimensional lettering is a more cost effective way to advertise your business without the use of internal illumination. Dimensional letters can be made a number of different ways. Formed plastic, flat cut acrylic, cast metal, flat cut metal and PVC are just some examples of solutions you can use.
Most recognize Pylon Signs as having similar characteristics as Monument Signs. One of the key differences between the two is the elevation of the sign off of the ground. Pylon Signs stand above the rest, allowing the public to better view them from farther away.
Monument signs are generally signs that are lower to the ground, usually 8' above grade or less. They can be internally or externally illuminated or not illuminated at all. Brick bases are often seen but they can also be fabricated entirely out of metal. Design your monument sign to match your building or match the theme of your business for extra effect.
Sandblasted signs are a great way to give your business or development a classy dimensional look. All our sandblasted signs are sandblasted HDU board custom painted to match your design. Sandblasted signs can have a classic wood-grain finish or a pebbled finish. Good for development or subdivision/business park signage.
Whether it is for aesthetics or for advertising, awnings are a great way to add to your store. Awnings come in several standard styles and can be custom made to fit any building. The standard awning styles are slant, shed, waterfall, quarter end and canopy. Awnings can also be made with a wide selection of vinyls and fabrics in many varying colors. Graphics can be applied either with standard adhesive vinyl or special heat transfer vinyl for fabric awnings.
Please ask your salesperson for assistance in finding out which awning will be best for you.
Job site signs are generally constructed using wooden posts and a substrate. Substrates normally used are MDO board, Omega Board or PVC. Occasionally on larger job site signs banners can be attached to a wooden frame to keep costs down. Vinyl posts are also available for longer lasting and more attractive signs.
Neon is a standard in the sign industry. Used to light up letters and create brilliant displays. Neon is glass tubing with gas inside that reacts when electricity passes through it. It can come in a variety of different colors and can be bent using heat to just about any shape that you desire. Neon is powered using transformers which convert standard voltage from primary electrical line into high voltage power supplies. Even though neon is being replaced in some applications with LED it will always be a staple in the sign industry.
Yard signs can be as simple or complex as you would like. The standard size for yard signs is 18" x 24" and is made from corex with a thin wire stand or an aluminum sign with a painted black steel frame. Since impression time is limited it is best to keep information limited to what is most important.
Spice up your street signage with custom designs by Sign-A-Rama. Traffic and street signage can generally be done by your local city. But if you want something a little more unique for your development we have a number of different options. We can work with you and the city to provide you with the best signs in the neighborhood.
